فروشگاه کوروش 09129360750

Dynacord DSA Dual Series
2-Channel Amplifiers Class A/B/H

Features :
-------------
Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

Dynacord DSA 8204 Specifications :
---------------------------------------------
Load Impedance : 2,4,8 Ω
Amplifier Power :
    650 W at 2 Ω per channel
    450 W at 4 Ω per channel
    270 W at 8 Ω per channel
    1300 W at 4 Ω bridged
    900 W at 8 Ω bridged
Maximum RMS Voltage Swing ( THD = 1%, 1 kHz ) : 55.3 V
Power Bandwidth ( THD = 1%,ref. 1 kHz, half power @ 4 Ω ) : < 10 Hz to 30 kHz
Voltage Gain, ref. 1 kHz : 32.0 dB
Input Sensitivity ( rated power @ 8 Ω, 1 kHz ) : +2.2 dBu (1.0 Vrms)
THD at rated Output Power ( MBW = 80 kHz, 1 kHz ) : < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz : < 0.1%
DIM30, 3.15 kHz, 15 kHz : < 0.05%
Maximum Input Level : +21 dBu (8.69 Vrms)
Crosstalk ref. 1 kHz, at rated output power : < -80 dB
Frequency Response ref. 1 kHz : 10 Hz to 40 kHz (±1 dB)
Input Impedance : 20 kΩ
Damping Factor, 1 kHz : > 300
Slew Rate : 25 V/m
Signal to Noise Ratio : > 106 dB
Output Noise, A-weighted < -71 dBu
Output Stage Topology : Class AB
Power Consumption : 550 W
Cooling : Front-to-rear, 3-stage-fans
Ambient Temperature Limits : +5 °C to +40 °C (40 °F to 105 °F)
Dimensions (W x H x D) : 483 x 88.1 x 421.5 mm
Weight : 12.6 kg (27.8 lbs)

Dynacord DSA 8206 Specifications :
---------------------------------------------
Load Impedance : 2,4,8 Ω
Amplifier Power :
    900 W at 2 Ω per channel
    600 W at 4 Ω per channel
    380 W at 8 Ω per channel
    1800 W at 4 Ω bridged
    1200 W at 8 Ω bridged
Maximum RMS Voltage Swing ( THD = 1%, 1 kHz ) : 65.1 V
Power Bandwidth ( THD = 1%,ref. 1 kHz, half power @ 4 Ω ) : < 10 Hz to 30 kHz
Voltage Gain, ref. 1 kHz : 32.0 dB
Input Sensitivity ( rated power @ 8 Ω, 1 kHz ) : +3.1 dBu (1.11 Vrms)
THD at rated Output Power ( MBW = 80 kHz, 1 kHz ) : < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz : < 0.1%
DIM30, 3.15 kHz, 15 kHz : < 0.05%
Maximum Input Level : +21 dBu (8.69 Vrms)
Crosstalk ref. 1 kHz, at rated output power : < -80 dB
Frequency Response ref. 1 kHz : 10 Hz to 40 kHz (±1 dB)
Input Impedance : 20 kΩ
Damping Factor, 1 kHz : > 300
Slew Rate : 26 V/m
Signal to Noise Ratio : > 107 dB
Output Noise, A-weighted < -71 dBu
Output Stage Topology : Class AB
Power Consumption : 700 W
Cooling : Front-to-rear, 3-stage-fans
Ambient Temperature Limits : +5 °C to +40 °C (40 °F to 105 °F)
Dimensions (W x H x D) : 483 x 88.1 x 421.5 mm
Weight : 14.8 kg (32.6 lbs)

Dynacord DSA 8209 Specifications :
---------------------------------------------
Load Impedance : 2,4,8 Ω
Amplifier Power :
    1250 W at 2 Ω per channel
    900 W at 4 Ω per channel
    550 W at 8 Ω per channel
    2800 W at 4 Ω bridged
    1800 W at 8 Ω bridged
Maximum RMS Voltage Swing ( THD = 1%, 1 kHz ) : 78.8 V
Power Bandwidth ( THD = 1%,ref. 1 kHz, half power @ 4 Ω ) : < 10 Hz to 30 kHz
Voltage Gain, ref. 1 kHz : 32.0 dB
Input Sensitivity ( rated power @ 8 Ω, 1 kHz ) : +5.1 dBu (1.39 Vrms)
THD at rated Output Power ( MBW = 80 kHz, 1 kHz ) : < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz : < 0.1%
DIM30, 3.15 kHz, 15 kHz : < 0.05%
Maximum Input Level : +21 dBu (8.69 Vrms)
Crosstalk ref. 1 kHz, at rated output power : < -80 dB
Frequency Response ref. 1 kHz : 10 Hz to 40 kHz (±1 dB)
Input Impedance : 20 kΩ
Damping Factor, 1 kHz : > 300
Slew Rate : 27 V/m
Signal to Noise Ratio : > 109 dB
Output Noise, A-weighted < -71 dBu
Output Stage Topology : Class H
Power Consumption : 700 W
Cooling : Front-to-rear, 3-stage-fans
Ambient Temperature Limits : +5 °C to +40 °C (40 °F to 105 °F)
Dimensions (W x H x D) : 483 x 88.1 x 421.5 mm
Weight : 16.3 kg (35.9 lbs)

Dynacord DSA 8212 Specifications :
---------------------------------------------
Load Impedance : 2,4,8 Ω
Amplifier Power :
    1800 W at 2 Ω per channel
    1200 W at 4 Ω per channel
    750 W at 8 Ω per channel
    3600 W at 4 Ω bridged
    2400 W at 8 Ω bridged
Maximum RMS Voltage Swing ( THD = 1%, 1 kHz ) : 90.6 V
Power Bandwidth ( THD = 1%,ref. 1 kHz, half power @ 4 Ω ) : < 10 Hz to 30 kHz
Voltage Gain, ref. 1 kHz : 32.0 dB
Input Sensitivity ( rated power @ 8 Ω, 1 kHz ) : +6.6 dBu (1.66 Vrms)
THD at rated Output Power ( MBW = 80 kHz, 1 kHz ) : < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz : < 0.1%
DIM30, 3.15 kHz, 15 kHz : < 0.05%
Maximum Input Level : +21 dBu (8.69 Vrms)
Crosstalk ref. 1 kHz, at rated output power : < -80 dB
Frequency Response ref. 1 kHz : 10 Hz to 40 kHz (±1 dB)
Input Impedance : 20 kΩ
Damping Factor, 1 kHz : > 300
Slew Rate : 30 V/m
Signal to Noise Ratio : > 110 dB
Output Noise, A-weighted < -71 dBu
Output Stage Topology : Class H
Power Consumption : 850 W
Cooling : Front-to-rear, 3-stage-fans
Ambient Temperature Limits : +5 °C to +40 °C (40 °F to 105 °F)
Dimensions (W x H x D) : 483 x 88.1 x 421.5 mm
Weight : 17.7 kg (39.0 lbs)

قیمت کالا : تماس بگیرید

� آشنایی با سایر انواع پاور آمپلی فایر

� آشنایی با سایر محصولات کمپانی Dynacord